0
0
PLOT columns
-
Description:
Non-polar PLOT column incorporating 100% divinylbenzene. Excellent for analysis of C1 to C3 hydrocarbons as well as isomers and alkanes up to C12. High retention for CO2 simplifies gas analysis; CO2 and methane separated from O2/N2/CO. (Note: O2/N2/CO not separated at ambient temperature.) Use for analysis of oxygenated compounds and solvents. Similar phases: HP-PLOT Q, CP-PoraPLOT Q, CP-PoraBOND Q, Supel-Q PLOT, Rt-Q-BOND
OUT OF STOCKNon-polar PLOT column incorporating 100% divinylbenzene. Excellent for analysis of C1 to C3 hydrocarbons as well as isomers and alkanes up to C12. High retention for CO2 simplifies gas analysis; CO2 and methane separated from O2/N2/CO. (Note: O2/N2/CO not separated at ambient temperature.) Use for analysis of oxygenated compounds and solvents. Similar phases: HP-PLOT Q, CP-PoraPLOT Q, CP-PoraBOND Q, Supel-Q PLOT, Rt-Q-BOND
-
Description:
SS-Alumina-MAPD is an alumina column focused specifically on the separation of the peaks from methylacetylene to propadiene (MAPD). This column has strong heat resistance, so it can be used up to 200 °C and can perform hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation.
OUT OF STOCKSS-Alumina-MAPD is an alumina column focused specifically on the separation of the peaks from methylacetylene to propadiene (MAPD). This column has strong heat resistance, so it can be used up to 200 °C and can perform hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation.
-
Description:
SS-Alumina-MAPD is an alumina column focused specifically on the separation of the peaks from methylacetylene to propadiene (MAPD). This column has strong heat resistance, so it can be used up to 200 °C and can perform hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation.
OUT OF STOCKSS-Alumina-MAPD is an alumina column focused specifically on the separation of the peaks from methylacetylene to propadiene (MAPD). This column has strong heat resistance, so it can be used up to 200 °C and can perform hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation.
-
Description:
SS-Alumina-MAPD is an alumina column focused specifically on the separation of the peaks from methylacetylene to propadiene (MAPD). This column has strong heat resistance, so it can be used up to 200 °C and can perform hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation.
OUT OF STOCKSS-Alumina-MAPD is an alumina column focused specifically on the separation of the peaks from methylacetylene to propadiene (MAPD). This column has strong heat resistance, so it can be used up to 200 °C and can perform hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation.
-
Description:
SS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
OUT OF STOCKSS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
-
Description:
SS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
OUT OF STOCKSS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
-
Description:
SS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
OUT OF STOCKSS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
-
Description:
SS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
OUT OF STOCKSS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
-
Description:
SS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
OUT OF STOCKSS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
-
Description:
SS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
OUT OF STOCKSS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
-
Description:
SS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
OUT OF STOCKSS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
-
Description:
SS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.
OUT OF STOCKSS-Alumina-KCL has strong heat resistance, so, it can be used up to 200 °C and is capable of hydrocarbon analysis up to C10. In addition, it has excellent stability and minimizes the retention time fluctuation due to moisture. It shows high selectivity for C1 to C5 hydrocarbons at ppm level. Since the alumina oxide adsorbent is fixed to the inner wall of the column, there is no need to worry about particle exfoliation. A column with a particle trap column (SS-Alumina-KCL-PT) is recommended when connected to MS detector. SS-Alumina-KCL-UMetal uses inactivated metal capillary that are resistant to physical impact, making the column easier to handle than fused silica capillary column.