0
0
Liquid Chromatography Consumables (LC and LC-MS)
Product Listing
-
Description:
The male nut fitting used with Shim-pack XR-ODS can withstand pressures to 35 MPa. They cannot be used for the Shim-pack XR-ODS III column inlet. Replacement ferrule 228-45717-02
IN STOCKThe male nut fitting used with Shim-pack XR-ODS can withstand pressures to 35 MPa. They cannot be used for the Shim-pack XR-ODS III column inlet. Replacement ferrule 228-45717-02
-
Description:
Zero dead volume design to prevent the spread of peaks. Double ended PEEK ferrule for connecting inlet/outlet tubing to columns. Use with knurled nut 228-45717-01.
IN STOCKZero dead volume design to prevent the spread of peaks. Double ended PEEK ferrule for connecting inlet/outlet tubing to columns. Use with knurled nut 228-45717-01.
-
Description:
Removes contaminants at the most upstream of HPLC system Does not affect system volume Available for LC/MS Internal Volume ~0.7mL Packing material Spherical Activated Carbon Replace once a year or after flowing for 60L The GLC Suction Filter 2 is the most upstream consumable part of a HPLC system and is useful for removing contaminants in the mobile phase. The product is easy to install and can be replaced by the user. Removal Effect of GLC Suction Filter 2 for LC/MS Removal of contaminants in the mobile phase by GLC Suction Filter 2 was evaluated. A mixture of acetonitrile and water (1/9, 5/5, 9/1) was used as the mobile phases. In all case, the removal of contaminants was confirmed and the noise level of the TIC was also reduced. Analytical Conditions Instruments : Nexera X2 Flow Rate : 0.2 mL /min Detection : MS (ESI), Scan Mode (100 to 2000 m/z , positive, negative) Take note: The suction tube is not included. 3mm outer diameter suction tube can be connected. When using ion-pair reagents in the mobile phase, the ion-pair reagent is retained in the product, and retention time and peak shape may be affected. Bleed noise from this product may be seen. This product does not remove all impurities. If impurities are not retained, ghost peaks may be detected. In this case, replace the product.
IN STOCKRemoves contaminants at the most upstream of HPLC system Does not affect system volume Available for LC/MS Internal Volume ~0.7mL Packing material Spherical Activated Carbon Replace once a year or after flowing for 60L The GLC Suction Filter 2 is the most upstream consumable part of a HPLC system and is useful for removing contaminants in the mobile phase. The product is easy to install and can be replaced by the user. Removal Effect of GLC Suction Filter 2 for LC/MS Removal of contaminants in the mobile phase by GLC Suction Filter 2 was evaluated. A mixture of acetonitrile and water (1/9, 5/5, 9/1) was used as the mobile phases. In all case, the removal of contaminants was confirmed and the noise level of the TIC was also reduced. Analytical Conditions Instruments : Nexera X2 Flow Rate : 0.2 mL /min Detection : MS (ESI), Scan Mode (100 to 2000 m/z , positive, negative) Take note: The suction tube is not included. 3mm outer diameter suction tube can be connected. When using ion-pair reagents in the mobile phase, the ion-pair reagent is retained in the product, and retention time and peak shape may be affected. Bleed noise from this product may be seen. This product does not remove all impurities. If impurities are not retained, ghost peaks may be detected. In this case, replace the product.
-
Description:
10 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
LOW STOCK10 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
-
Description:
25 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
IN STOCK25 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
-
Description:
50 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
IN STOCK50 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
-
Description:
100 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
IN STOCK100 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
-
Description:
250 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
LOW STOCK250 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
-
Description:
500 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
IN STOCK500 μL Fixed Needle Syringe for HPLC Manual Injectors Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD Needle ID (mm) Needle Tipe Syringe Part Number 10 μL No 51 22 0.028" 0.17 LC 670-12554-01 25 μL No 51 22 0.028" 0.37 LC 670-12554-02 50 μL No 51 22 0.028" 0.37 LC 670-12554-03 100 μL No 51 22 0.028" 0.37 LC 670-12554-04 250 μL No 51 22 0.028" 0.37 LC 670-12554-05 500 μL No 51 22 0.028" 0.37 LC 670-12554-06
-
Description:
This Polymer Tubing Cutter provides the most accurate cut which enables leak free HPLC connection. It will provide a clean, burr free, 90 degree cut for your 1/16 or 1/8OD tubing.
OUT OF STOCKThis Polymer Tubing Cutter provides the most accurate cut which enables leak free HPLC connection. It will provide a clean, burr free, 90 degree cut for your 1/16 or 1/8OD tubing.
Liquid Chromatography (LC) and Liquid Chromatography-Mass Spectrometry (LC-MS) are cornerstones in analytical chemistry, offering unparalleled accuracy and precision. However, the system's reliability largely depends on the quality of the consumables used. ShopShimadzu’s range of LC and LC-MS supplies are designed to meet the highest quality standards, ensuring accurate, reliable results. Our offerings include LC.LCMS Accessories, Connections, Tubings, Fittings, LC syringes, Pre-column filters, Solvent Safety Caps Kits, LC.LCMS Solvent Waste Kits, and Solvent Bottles and Caps. Each consumable undergoes rigorous quality control, ensuring a seamless analytical experience. Crafted with superior materials and tested for optimal performance, our consumables set the industry benchmark for quality and reliability.
Our Range of LC-MS Supplies
Connections
Our connections include a variety of ferrules and couplings designed for tubing. These supplies ensure secure sealing and perfect fittings, preventing any form of leakage or contamination that could compromise your analytical results. Therefore, they serve as the link between various components of your LC or LC-MS system, providing you with reliable analyses.
Tubings
Our tubings are made from quality materials such as PEEK (polyetheretherketone) and stainless steel, available in various sizes to accommodate different applications and LC or LC-MS system configurations. These consumables ensure optimum flow rates, and accurate readings, and minimise sample loss. The choice of materials offers chemical resistance and durability, guaranteeing long-lasting performance and reliable analytical outcomes.
Fittings
Our range of fittings is engineered for leak-proof connectivity, offering various options like ultra-high pressure fittings, stainless steel nuts with patented PEEK polymer blend ferrules, and more. These consumables ensure there's no cross-contamination or leakage, thus maintaining the integrity of your analysis. Our assortment is designed to meet the demands of high-pressure, high-accuracy LC and LC-MS systems.
LC syringes
Our LC syringes are engineered for low dead volume and high precision, ensuring accurate sample injections and reliable analytical results. These syringes can withstand repetitive use without compromising performance. Their precise calibration guarantees minimal sample waste, making them one of the essential supplies in your LC or LC-MS system for achieving consistent and dependable outcomes.
Pre-column filters
Our range of pre-column filters is designed to remove unwanted particulates from your samples. These filters serve as a vital line of defence, safeguarding the column and the mass spectrometer detector from potential damage or contamination. Engineered for high-performance systems, these supplies help maintain the longevity and accuracy of your LC or LC-MS analyses.
Solvent Safety Caps Kit
Our solvent safety caps kit can help prevent accidental spills and leaks of volatile or hazardous solvents. These caps provide a secure seal on solvent bottles, ensuring a safer, more controlled lab environment. Their easy-to-use design makes them essential supplies for maintaining the overall integrity and safety of your LC or LC-MS systems.
LC.LCMS Solvent Waste Kit
Our LC.LCMS solvent waste kits are designed for the safe disposal of solvents and other chemical waste. These kits include safety waste caps, tube connectors, and fittings to ensure a secure waste collection process. These supplies allow for the proper management of waste generated during LC and LC-MS analyses.
Solvent Bottle and Cap
Our solvent bottles and caps ensure the safe storage of various solvents. Designed with easy-to-read labels and secure sealing mechanisms, these bottles, and caps facilitate identification and safe handling. They contribute significantly to the safety and efficiency of the laboratory, making them vital supplies in any LC or LC-MS analytical setup.
Trusted Provider for LC Consumables
Engineered for precision and durability, ShopShimadzu’s LC consumables stand out for their advanced technical features. With zero dead volume design in our fittings, we ensure the prevention of peak spreading broadening, allowing for more accurate analyses. Our double-ended PEEK ferrules offer robust and reliable connections, while our Delrin Column Couplers maintain efficiency with low swept-volume connections. Safety is also a priority; our exhaust filters are designed with multiple layers of activated carbon to provide superior protection against solvent vapours.
When it comes to reliability, technical superiority, and safety, ShopShimadzu sets the standard. Backed by rigorous testing and a commitment to innovation, our LC consumables bring peace of mind and unparalleled performance to your laboratory operations.
So, why compromise on the quality and safety of your LC-MS consumables? Choose ShopShimadzu, one of the leading suppliers of laboratory consumables in Singapore, for products that are technically superior and rigorously tested including GC columns, HPLC columns and more. Shop now to elevate your analytical experience.