0
0
- Home
- Technique Categories
Technique Categories
Product Listing
-
Product PartDescription:
Frit Porosity: 2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 2.1 µL (0.062" dia.), 5.2 µL (0.125" dia.), 11.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads
OUT OF STOCKFrit Porosity: 2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 2.1 µL (0.062" dia.), 5.2 µL (0.125" dia.), 11.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads
-
Product PartDescription:
Pressure rated up to 25,000 psi (1,720 bar) Capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over; Available in multiple threaded configurations for use with 1/16 in (1.6 mm) and 1/32 in (0.79 mm) OD tubing Materials of construction: Stainless Steel and Proprietary PEEK™ polymer blend (PK) The fittings are reusable when following the proper tightening torque specification. With a polymer front ferrule, there is no damage to the tubing or receiving port, also increasing the life of these components.
OUT OF STOCKPressure rated up to 25,000 psi (1,720 bar) Capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over; Available in multiple threaded configurations for use with 1/16 in (1.6 mm) and 1/32 in (0.79 mm) OD tubing Materials of construction: Stainless Steel and Proprietary PEEK™ polymer blend (PK) The fittings are reusable when following the proper tightening torque specification. With a polymer front ferrule, there is no damage to the tubing or receiving port, also increasing the life of these components.
-
Product PartDescription:
Pressure rated up to 25,000 psi (1,720 bar) Capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over; Available in multiple threaded configurations for use with 1/16 in (1.6 mm) and 1/32 in (0.79 mm) OD tubing Materials of construction: Stainless Steel and Proprietary PEEK™ polymer blend (PK) The fittings are reusable when following the proper tightening torque specification. With a polymer front ferrule, there is no damage to the tubing or receiving port, also increasing the life of these components.
OUT OF STOCKPressure rated up to 25,000 psi (1,720 bar) Capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over; Available in multiple threaded configurations for use with 1/16 in (1.6 mm) and 1/32 in (0.79 mm) OD tubing Materials of construction: Stainless Steel and Proprietary PEEK™ polymer blend (PK) The fittings are reusable when following the proper tightening torque specification. With a polymer front ferrule, there is no damage to the tubing or receiving port, also increasing the life of these components.
-
Product PartDescription:
This solvent disposal kit ensures safe solvent disposal at your HPLC. The exhaust filter binds solvent vapours and ensures occupational safety in your laboratory. The kit includes: 1 x Safety Waste Cap, GL45 2 x PFA fitting 2.3 mm OD 2 x PFA-Fitting 3.2 mm OD 1 x PP tube connector 5.0 - 11.5mm ID 1 x GL14 connection for exhaust filter 1 x canister, 5L, PE-HD 1 x exhaust filter M, with splash guard and change indicator Thread size: GL45 No. of tube connections: 1 No. of capillary connections: 2 Fitting 2.3mm: 2 Tube connector 5.0-11.5mm: 1 Fitting 3.2mm: 2 Blind plug capillaries: 2 Exhaust filter M: 1 Labeling field: Yes UN approval: Yes Capacity (litres): 5,00
OUT OF STOCKThis solvent disposal kit ensures safe solvent disposal at your HPLC. The exhaust filter binds solvent vapours and ensures occupational safety in your laboratory. The kit includes: 1 x Safety Waste Cap, GL45 2 x PFA fitting 2.3 mm OD 2 x PFA-Fitting 3.2 mm OD 1 x PP tube connector 5.0 - 11.5mm ID 1 x GL14 connection for exhaust filter 1 x canister, 5L, PE-HD 1 x exhaust filter M, with splash guard and change indicator Thread size: GL45 No. of tube connections: 1 No. of capillary connections: 2 Fitting 2.3mm: 2 Tube connector 5.0-11.5mm: 1 Fitting 3.2mm: 2 Blind plug capillaries: 2 Exhaust filter M: 1 Labeling field: Yes UN approval: Yes Capacity (litres): 5,00
-
Product PartDescription:
Shimadzu Solvent Caps hermetically seal all laboratory bottles with GL45 thread and ensure safe inflow and outflow of HPLC solvents via capillaries with OD-ø 3.2 mm. Replacement for: 226-50318-01
OUT OF STOCKShimadzu Solvent Caps hermetically seal all laboratory bottles with GL45 thread and ensure safe inflow and outflow of HPLC solvents via capillaries with OD-ø 3.2 mm. Replacement for: 226-50318-01
-
Product PartDescription:
Tested to 10ppb for TOC, Certified Kit
-
Product Part
Description:
PP cap, centre hole, for 40mL vials, 72/pack
OUT OF STOCKPP cap, centre hole, for 40mL vials, 72/pack
-
Product Part
Description:
LC/MS moisture kit for LC/MS. Up to 20 L/min. of moisture-free nitrogen per minute with this LC/MS High Flow Kit This Gas filter set consists of 226-50762-00 High Flow Moisture Filter Bundle 1 pc 226-50794-01 Particle Filter 1 pc 226-50775-01 High Flow Base plate 1 pc Kit Part Number 226-50722-00 1 Set
OUT OF STOCKLC/MS moisture kit for LC/MS. Up to 20 L/min. of moisture-free nitrogen per minute with this LC/MS High Flow Kit This Gas filter set consists of 226-50762-00 High Flow Moisture Filter Bundle 1 pc 226-50794-01 Particle Filter 1 pc 226-50775-01 High Flow Base plate 1 pc Kit Part Number 226-50722-00 1 Set
-
Product PartDescription:
The triple combination filter kit is ideal for purifying GC/MS carrier gases. It contains oxygen, moisture and hydrocarbon scrubbers in one easy to change economical cartridge. Type P/N Description Installation Kit 226-50710-00 Shimadzu 1 Triple (O2/H20/HC) Filter Kit - 1/8" SS Installation Kit 226-50712-00 Shimadzu 1 Triple (O2/H20/HC) Helium-specific Filter Kit - 1/8" SS Installation Kit 226-50740-00 Shimadzu 1 Triple (O2/H20/HC) Hydrogen-specific Filter Kit - 1/8" SS Replacement filter 226-50751-00 Shimadzu Triple (O2/H2O/HC) Filter Replacement filter 226-50752-00 Shimadzu Triple (O2/H2O/HC) Helium-specific Filter Replacement filter 226-50752-10 Shimadzu Triple (O2/H2O/HC) Hydrogen-specific Filter
OUT OF STOCKThe triple combination filter kit is ideal for purifying GC/MS carrier gases. It contains oxygen, moisture and hydrocarbon scrubbers in one easy to change economical cartridge. Type P/N Description Installation Kit 226-50710-00 Shimadzu 1 Triple (O2/H20/HC) Filter Kit - 1/8" SS Installation Kit 226-50712-00 Shimadzu 1 Triple (O2/H20/HC) Helium-specific Filter Kit - 1/8" SS Installation Kit 226-50740-00 Shimadzu 1 Triple (O2/H20/HC) Hydrogen-specific Filter Kit - 1/8" SS Replacement filter 226-50751-00 Shimadzu Triple (O2/H2O/HC) Filter Replacement filter 226-50752-00 Shimadzu Triple (O2/H2O/HC) Helium-specific Filter Replacement filter 226-50752-10 Shimadzu Triple (O2/H2O/HC) Hydrogen-specific Filter
-
Product PartDescription:
The Fuel Gas Filter is perfect for purifying flame ionization detector (FID) fuel gases, removing both moisture and hydrocarbons. Using the Fuel Gas Filter for FID Hydrogen and air will produce a stable baseline, improving overall reproducability and sensitivity. P/N Description 226-50750-00 Combi (Hydrocarbon/Moisture) Filter 226-50758-00 Combi (Oxygen/Moisture) Filter 226-50759-00 Combi (Carbon Dioxide/Moisture) Filter
OUT OF STOCKThe Fuel Gas Filter is perfect for purifying flame ionization detector (FID) fuel gases, removing both moisture and hydrocarbons. Using the Fuel Gas Filter for FID Hydrogen and air will produce a stable baseline, improving overall reproducability and sensitivity. P/N Description 226-50750-00 Combi (Hydrocarbon/Moisture) Filter 226-50758-00 Combi (Oxygen/Moisture) Filter 226-50759-00 Combi (Carbon Dioxide/Moisture) Filter
-
Product PartDescription:
The Triple trap is ideal for purifying carrier gas. It contains oxygen, moisture and hydrocarbon scrubbers in one easy to change economical cartridge This trap is used in GC/FID and GC/MS filter set. Part number Description 226-50751-00 Triple (Oxygen/Moisture/Hydrocarbon) Filter 226-50752-00 Triple (Oxygen/Moisture/Hydrocarbon) Helium-specific Filter 226-50752-10 Triple (Oxygen/Moisture/Hydrocarbon) Hydrogen-specific Filter
OUT OF STOCKThe Triple trap is ideal for purifying carrier gas. It contains oxygen, moisture and hydrocarbon scrubbers in one easy to change economical cartridge This trap is used in GC/FID and GC/MS filter set. Part number Description 226-50751-00 Triple (Oxygen/Moisture/Hydrocarbon) Filter 226-50752-00 Triple (Oxygen/Moisture/Hydrocarbon) Helium-specific Filter 226-50752-10 Triple (Oxygen/Moisture/Hydrocarbon) Hydrogen-specific Filter
-
Product Part
Description:
Removes carbon dioxide from gas streams. To be used in combination with a Moisture Filter P/N Description 226-50754-00 Moisture Filter 226-50755-00 Oxygen Filter 226-50756-00 Hydrocarbon Filter 226-50757-00 Carbon Dioxide Filter
OUT OF STOCKRemoves carbon dioxide from gas streams. To be used in combination with a Moisture Filter P/N Description 226-50754-00 Moisture Filter 226-50755-00 Oxygen Filter 226-50756-00 Hydrocarbon Filter 226-50757-00 Carbon Dioxide Filter