0
0
Pre-column filters
Product Listing
-
Description:
0.5 micron SST Frit, 1pc/pack Frit size: 0.5 micron x 0.062" dia. Port Compatibility: Halo Male Compatibility: Halo Internal volume: 1 μL Note: Halo is compatible with most HPLC ports
LOW STOCK0.5 micron SST Frit, 1pc/pack Frit size: 0.5 micron x 0.062" dia. Port Compatibility: Halo Male Compatibility: Halo Internal volume: 1 μL Note: Halo is compatible with most HPLC ports
-
Description:
0.5 micron SST Frit, 10pcs per pack Frit size: 0.5 micron x 0.062" dia. Port Compatibility: Halo Male Compatibility: Halo Internal volume: 1 μL Note: Halo is compatible with most HPLC ports
LOW STOCK0.5 micron SST Frit, 10pcs per pack Frit size: 0.5 micron x 0.062" dia. Port Compatibility: Halo Male Compatibility: Halo Internal volume: 1 μL Note: Halo is compatible with most HPLC ports
-
Description:
Replacement filter for 226-50001-99 Replacement filters for In-line HPLC/UHPLC Precolumn Filters and Direct Connect HPLC/UHPLC Precolumn Filters.
OUT OF STOCKReplacement filter for 226-50001-99 Replacement filters for In-line HPLC/UHPLC Precolumn Filters and Direct Connect HPLC/UHPLC Precolumn Filters.
-
Description:
Replacement filters for In-line HPLC/UHPLC Precolumn Filters and Direct Connect HPLC/UHPLC Precolumn Filters. Replacement filter for 226-50001-89.
IN STOCKReplacement filters for In-line HPLC/UHPLC Precolumn Filters and Direct Connect HPLC/UHPLC Precolumn Filters. Replacement filter for 226-50001-89.
-
Description:
Replacement filters for In-line HPLC/UHPLC Precolumn Filters and Direct Connect HPLC/UHPLC Precolumn Filters. Replacement filter for 226-50001-79.
OUT OF STOCKReplacement filters for In-line HPLC/UHPLC Precolumn Filters and Direct Connect HPLC/UHPLC Precolumn Filters. Replacement filter for 226-50001-79.
-
Description:
Frit Porosity: 0.2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 1.8 µL (0.062" dia.), 3.5 µL (0.125" dia.), 7.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads In high throughput and routine HPLC separations where mobile phase and sample contamination cause a decrease in column performance or premature column failure, this Pre-column filter will maintain the efficiency of high perfrmance columns and ensure a negligible loss of resolution. This filter can be finger tighten, then wrench tighten an additional 1/4 - 1/2 turn.
LOW STOCKFrit Porosity: 0.2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 1.8 µL (0.062" dia.), 3.5 µL (0.125" dia.), 7.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads In high throughput and routine HPLC separations where mobile phase and sample contamination cause a decrease in column performance or premature column failure, this Pre-column filter will maintain the efficiency of high perfrmance columns and ensure a negligible loss of resolution. This filter can be finger tighten, then wrench tighten an additional 1/4 - 1/2 turn.
-
Description:
Frit Porosity: 0.2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 1.8 µL (0.062" dia.), 3.5 µL (0.125" dia.), 7.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads In high throughput and routine HPLC separations where mobile phase and sample contamination cause a decrease in column performance or premature column failure, this Pre-column filter will maintain the efficiency of high perfrmance columns and ensure a negligible loss of resolution. This filter can be finger tighten, then wrench tighten an additional 1/4 - 1/2 turn.
LOW STOCKFrit Porosity: 0.2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 1.8 µL (0.062" dia.), 3.5 µL (0.125" dia.), 7.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads In high throughput and routine HPLC separations where mobile phase and sample contamination cause a decrease in column performance or premature column failure, this Pre-column filter will maintain the efficiency of high perfrmance columns and ensure a negligible loss of resolution. This filter can be finger tighten, then wrench tighten an additional 1/4 - 1/2 turn.
-
Description:
Frit Porosity: 0.2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 1.8 µL (0.062" dia.), 3.5 µL (0.125" dia.), 7.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads In high throughput and routine HPLC separations where mobile phase and sample contamination cause a decrease in column performance or premature column failure, this Pre-column filter will maintain the efficiency of high perfrmance columns and ensure a negligible loss of resolution. This filter can be finger tighten, then wrench tighten an additional 1/4 - 1/2 turn. For replacement filter, please refer to 226-50001-05
OUT OF STOCKFrit Porosity: 0.2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 1.8 µL (0.062" dia.), 3.5 µL (0.125" dia.), 7.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads In high throughput and routine HPLC separations where mobile phase and sample contamination cause a decrease in column performance or premature column failure, this Pre-column filter will maintain the efficiency of high perfrmance columns and ensure a negligible loss of resolution. This filter can be finger tighten, then wrench tighten an additional 1/4 - 1/2 turn. For replacement filter, please refer to 226-50001-05
-
Description:
Frit Porosity: 2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 2.1 µL (0.062" dia.), 5.2 µL (0.125" dia.), 11.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads
OUT OF STOCKFrit Porosity: 2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 2.1 µL (0.062" dia.), 5.2 µL (0.125" dia.), 11.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads
