UHPLC and HPLC Columns



Product Listing

  • Product Part
    Description:

    Guard column cartridges only Need to pair with Shim-pack Velox EXP Direct Connect holder

    OUT OF STOCK

    Guard column cartridges only Need to pair with Shim-pack Velox EXP Direct Connect holder

  • Product Part
    Description:

    Guard column cartridges only Need to pair with Shim-pack Velox EXP Direct Connect holder

    LOW STOCK

    Guard column cartridges only Need to pair with Shim-pack Velox EXP Direct Connect holder

  • Product Part
    Description:

    Guard column cartridges only Need to pair with Shim-pack Velox EXP Direct Connect holder

    OUT OF STOCK

    Guard column cartridges only Need to pair with Shim-pack Velox EXP Direct Connect holder

  • Product Part
    Description:

    Free-turning architecture lets you change cartridges by hand without breaking inlet / outlet fluid connections — no tools needed. Auto-adjusting design provides ZDV (zero dead volume) connection to any 10-32 female port. Requires separate guard column cartridges ( in 2.1, 3.0, and 4.6 mm)

    Free-turning architecture lets you change cartridges by hand without breaking inlet / outlet fluid connections — no tools needed. Auto-adjusting design provides ZDV (zero dead volume) connection to any 10-32 female port. Requires separate guard column cartridges ( in 2.1, 3.0, and 4.6 mm)

  • Product Part
    Description:

    Leak tight to 15,000 psi (1034 bar). 0.2 µm stainless-steel frit in a stainless-steel body with PEEK ferrule To minimize extra column volume and maximize UHPLC sample throughput with SPE, SLE, or other sample preparation techniques, pair 1.8 μm Shim-pack Velox UHPLC columns with an Shim-pack Velox UHPLC Precolumn filter instead of a guard cartridge. Shim-pack Velox UHPLC filters are designed to be an affordable UHPLC precolumn filter with a total volume of less than 1 µL. These filters have minimal effect on efficiency with all UHPLC columns and systems and, when properly used, should not impact separations. In order to ensure that chromatographic performance is not affected, it is strongly recommended that the filter not be removed from the chromatography column until it will be replaced. Repeated installation of the same UltraShield filter in multiple columns and instruments may lead to diminished performance.  

    Leak tight to 15,000 psi (1034 bar). 0.2 µm stainless-steel frit in a stainless-steel body with PEEK ferrule To minimize extra column volume and maximize UHPLC sample throughput with SPE, SLE, or other sample preparation techniques, pair 1.8 μm Shim-pack Velox UHPLC columns with an Shim-pack Velox UHPLC Precolumn filter instead of a guard cartridge. Shim-pack Velox UHPLC filters are designed to be an affordable UHPLC precolumn filter with a total volume of less than 1 µL. These filters have minimal effect on efficiency with all UHPLC columns and systems and, when properly used, should not impact separations. In order to ensure that chromatographic performance is not affected, it is strongly recommended that the filter not be removed from the chromatography column until it will be replaced. Repeated installation of the same UltraShield filter in multiple columns and instruments may lead to diminished performance.  

  • Product Part
    Description:

    Leak tight to 15,000 psi (1034 bar). 0.2 µm stainless-steel frit in a stainless-steel body with PEEK ferrule To minimize extra column volume and maximize UHPLC sample throughput with SPE, SLE, or other sample preparation techniques, pair 1.8 μm Shim-pack Velox UHPLC columns with an Shim-pack Velox UHPLC Precolumn filter instead of a guard cartridge. Shim-pack Velox UHPLC filters are designed to be an affordable UHPLC precolumn filter with a total volume of less than 1 µL. These filters have minimal effect on efficiency with all UHPLC columns and systems and, when properly used, should not impact separations. In order to ensure that chromatographic performance is not affected, it is strongly recommended that the filter not be removed from the chromatography column until it will be replaced. Repeated installation of the same UltraShield filter in multiple columns and instruments may lead to diminished performance.  

    OUT OF STOCK

    Leak tight to 15,000 psi (1034 bar). 0.2 µm stainless-steel frit in a stainless-steel body with PEEK ferrule To minimize extra column volume and maximize UHPLC sample throughput with SPE, SLE, or other sample preparation techniques, pair 1.8 μm Shim-pack Velox UHPLC columns with an Shim-pack Velox UHPLC Precolumn filter instead of a guard cartridge. Shim-pack Velox UHPLC filters are designed to be an affordable UHPLC precolumn filter with a total volume of less than 1 µL. These filters have minimal effect on efficiency with all UHPLC columns and systems and, when properly used, should not impact separations. In order to ensure that chromatographic performance is not affected, it is strongly recommended that the filter not be removed from the chromatography column until it will be replaced. Repeated installation of the same UltraShield filter in multiple columns and instruments may lead to diminished performance.  

  • Product Part
    Description:

    Leak tight to 15,000 psi (1034 bar). 0.2 µm stainless-steel frit in a stainless-steel body with PEEK ferrule To minimize extra column volume and maximize UHPLC sample throughput with SPE, SLE, or other sample preparation techniques, pair 1.8 μm Shim-pack Velox UHPLC columns with an Shim-pack Velox UHPLC Precolumn filter instead of a guard cartridge. Shim-pack Velox UHPLC filters are designed to be an affordable UHPLC precolumn filter with a total volume of less than 1 µL. These filters have minimal effect on efficiency with all UHPLC columns and systems and, when properly used, should not impact separations. In order to ensure that chromatographic performance is not affected, it is strongly recommended that the filter not be removed from the chromatography column until it will be replaced. Repeated installation of the same UltraShield filter in multiple columns and instruments may lead to diminished performance.  

    OUT OF STOCK

    Leak tight to 15,000 psi (1034 bar). 0.2 µm stainless-steel frit in a stainless-steel body with PEEK ferrule To minimize extra column volume and maximize UHPLC sample throughput with SPE, SLE, or other sample preparation techniques, pair 1.8 μm Shim-pack Velox UHPLC columns with an Shim-pack Velox UHPLC Precolumn filter instead of a guard cartridge. Shim-pack Velox UHPLC filters are designed to be an affordable UHPLC precolumn filter with a total volume of less than 1 µL. These filters have minimal effect on efficiency with all UHPLC columns and systems and, when properly used, should not impact separations. In order to ensure that chromatographic performance is not affected, it is strongly recommended that the filter not be removed from the chromatography column until it will be replaced. Repeated installation of the same UltraShield filter in multiple columns and instruments may lead to diminished performance.